Most Bellevue bathroom remodels land between $25,000 and $40,000 when the layout stays put, with cosmetic refreshes running $10,000 to $16,000 and projects that move plumbing reaching $40,000 to $75,000. These are planning ranges, not quotes. The real number depends on your bathroom, your material choices, and what the walls turn out to be hiding once demo starts. On the high end, a full custom primary suite on the Eastside can run from $85,000, so a bigger vision is not off the table if that is where you are headed.
Every tier in this guide comes from our own bathroom remodeling work across Bellevue and Redmond. Where we cite something outside that project history, we say where it came from.
Table of Contents
Bathroom Remodel Cost by Scope
- Cosmetic refresh, $10,000 to $16,000: The layout and plumbing stay exactly where they are. The budget goes into a new vanity, flooring, lighting, mirror, and fixtures.
- Full remodel in the existing footprint, $25,000 to $40,000: A gut demo, a new tiled shower with proper waterproofing, a vanity and countertop, flooring, a toilet, and lighting. The drain stays put.
- Plumbing moved, $40,000 to $75,000: Once the drain relocates for a larger or curbless shower, a double vanity, a heated floor, or custom glass, more trades have to coordinate, and the number climbs with them.
- Spa level, from $85,000: A steam shower, stone surfaces throughout, structural changes, and premium ventilation.
These four tiers are separate paths, not points on one sliding scale. The jump from one to the next is driven by scope, mainly whether plumbing moves, rather than by choosing nicer tile inside the same footprint.
One caution worth building into how you compare bids. Anything under $15,000 for licensed, full-scope work in this market is usually either a cosmetic refresh or a project that is not fully licensed. If a quote comes in well below the tier it claims to cover, that is the question to ask before you sign, not after.
The Drain Decides More Than the Finishes
Before a single finish gets chosen, one detail sets the ceiling on the budget. Where the drain sits.
Keeping the drain exactly where it is holds a project inside one tier. Everything from the tile to the vanity can change, and the number stays in the full-remodel band. Move it, and you bring in more trades, more inspection points, and more schedule, all before a single tile gets set. That is what pushes a project into the next tier up.
Two bathrooms with identical finishes and identical square footage can sit twenty thousand dollars apart on this one decision. Most homeowners find that out after they have already committed to a layout, which is exactly backward.
Check out these bathroom remodel ideas to see which layouts require moving plumbing, so you can settle on a layout you can actually afford.
Cost by Bathroom Size and Type
Size matters less than most people expect, but it does shift where a project lands within the tiers above.
- Half bath or powder room (15 to 30 sq ft): Usually sits at the cosmetic end, occasionally reaching into the low end of a full remodel if the vanity and lighting get a real upgrade.
- Guest or hall bath (35 to 60 sq ft): The classic full-remodel project. Gut demo, new tiled shower, drain staying put.
- Primary bath (80 to 120+ sq ft): Sits at the top of the full-remodel band and often crosses into the plumbing-moved tier once a double vanity or a larger shower enters the plan.
Small Bathroom Remodel Cost
Small bathrooms do not scale down proportionally, and this surprises almost everyone the first time they hear it.
Plumbing, waterproofing, ventilation, and inspections are close to fixed costs regardless of floor area. A plumber’s minimum charge does not shrink because the room is smaller. A 30 square foot bathroom and a 60 square foot bathroom with the same scope of work can land within a few thousand dollars of each other, because most of what drives the price barely notices the difference in square footage.
Primary Bathroom Remodel Cost
Primary bathrooms carry more of everything. Higher fixture count, a double vanity, a separate tub and shower, and more tile coverage. Those specific drivers, rather than square footage on its own, are what push a primary bath toward the plumbing-moved tier. A double vanity alone usually means a second drain and a second supply line.
Once a primary bathroom’s scope pushes past $75,000, it has moved into spa-level territory rather than simply being an expensive full remodel.
Small does not mean cheap, and big does not mean expensive in a straight line. The scope decisions inside each size are what set the number, which is why the four tiers are worth knowing before the square footage is.
Bathroom Remodel Cost Per Square Foot
Fixr’s 2026 data puts the national average around $120 per square foot, with a range of roughly $70 to $400 depending on scope and material quality.
A $25,000 full remodel in a 60-square-foot hall bath works out to about $417 per square foot, which sits above the top of the national range before the project has done anything unusual. That is not a sign the tiers are inflated. It is what the labor rates, code requirements, and permit structure covered further down this page actually do to Bellevue pricing.
So use the national figure for what it is worth, which is context, and not as a benchmark for a bid in this market. A Bellevue project will sit above that range routinely.
Two more things worth knowing about this number. Smaller bathrooms carry a higher per-square-foot figure than larger ones, for the same reason a 30-square-foot bath and a 60-square-foot bath can cost about the same in total. Fixed costs get spread across less floor area. And multiplying any per-square-foot figure by your square footage will not produce an accurate quote. It is a rough sanity check for comparing bids against each other, not a way to build a number from scratch.
Use the hard surface calculator and countertop calculator to get the real estimate for the surfaces you are actually choosing.
Where the Money Goes
Inside a full remodel, the proportions shift depending on scope. A cosmetic refresh spends very differently across these same categories, because several of these line items barely exist in a refresh at all. The ranges below reflect our own completed projects in Bellevue and Redmond.
- Demolition and Disposal: Cost moves with what comes out and what is behind it. Tile removal, a cast iron tub, and disposal fees all vary project to project.
- Plumbing: Cost moves with fixture count, whether the drain relocates, and the condition of existing supply lines in older homes. See the drain section above for why this line item alone can move a project into a different tier.
- Electrical: Cost moves with circuit count, whether the room needs bringing up to current code, and added loads like heated flooring or a larger exhaust fan.
- Waterproofing and the Shower Assembly: Cost moves with the waterproofing method, shower size, and how high the tile runs up the wall. This is largely invisible in the finished room, which makes it the wrong place to economize.
- Tile and Installation: Cost moves with tile size, layout pattern, substrate flatness, and total coverage area. Labor often exceeds the cost of the material itself on this line.
- Vanity and Cabinetry: Cabinetry cost moves with stock versus semi-custom versus fully custom, and with overall size.
- Countertop and Vanity Surface: The Cost for countertops moves with material, edge detail, and sink cutouts.
- Flooring: Cost moves with material choice and any subfloor prep or repair discovered at demo. More on the material trade-offs below.
- Fixtures, Lighting, and Glass: Cost moves with finish level, and for custom shower glass, with lead time as much as price.
Add plumbing and the wet area together, and that combination is typically the single largest share of a full remodel’s budget, ahead of any individual finish choice.
Flooring and Surface Choices That Move the Number
This is where a flooring specialist should look different from a general contractor writing about bathroom costs. Most cost guides give materials one paragraph. We do this for a living, so here is the real breakdown of what moves the number.
Luxury Vinyl and Waterproof Flooring
This type of flooring carries the lowest installed cost of the three main options, and they are noticeably warmer underfoot than tile, which matters at 6 a.m. in a Bellevue winter. Performance depends on the specific product’s water rating rather than the category name. Two floors that look identical on a showroom sample can behave very differently once they are living in a wet room, so check the rating on any luxury vinyl or waterproof flooring product before assuming it is bathroom-ready.
Porcelain and Ceramic Tile
This hard flooring sits in the mid-range and remains the default for wet areas, for good reason. They handle moisture well and come in far more sizes, colors, and finishes than anything else on this list. What actually moves tile cost, beyond the price of the tile itself, is substrate flatness, layout pattern, tile size, how high coverage runs up the wall, and the waterproofing method underneath. Two bathrooms with the same tile can land at very different labor costs depending on those details, which is exactly why tile installation is one of the hardest line items to estimate from a photo.
Natural Stone
Stone floor carries the highest installed cost of the three and the highest ongoing maintenance, since most stone needs periodic sealing to keep performing in a wet room the way tile does without extra attention.
Vanity Surfaces
Vanities follow similar logic. Quartz is the common choice for a bathroom vanity top because it handles daily water exposure without the sealing routine natural stone requires, while stone still wins on the kind of one-of-a-kind veining quartz cannot fully replicate.
Slip Resistance
This gets treated as an afterthought and should not be. A tile’s slip resistance rating matters more than how the sample looks dry in a showroom, because a polished tile that looks beautiful on display can turn into a real problem the moment it is wet.
Heated Flooring
These floors belong in this section for one reason. It is a planned up-front cost, not an add-on. The labor to lift a floor is already priced into the job once tile is coming out anyway, so adding heat at that point costs far less than retrofitting it later. Decide before the floor comes up, not after.
Permits, Inspections, and Timeline
Bellevue requires permits for bathroom work that touches plumbing, electrical, or structural elements, while limited cosmetic updates generally do not need one.
On the cost side, the City of Bellevue assesses building permit fees based on the fair market value of the construction rather than charging a flat rate, so the fee scales with your project instead of sitting as a fixed line item.
Think about the schedule in phases rather than as one number. Planning and material selection, permit review, construction, then final items and the punch list. Material lead times sit outside the construction weeks entirely and are worth planning around early. Custom shower glass and special-order tile are the usual long poles, and a special-order tile alone can add three or four weeks. A bathroom built around what is in stock moves considerably faster than one built around a material shipping from overseas.
Hidden Costs in Older Eastside Homes
Pre-1990s Eastside homes frequently reveal outdated or galvanized plumbing, moisture damage behind old shower inserts, and failed waterproofing once demolition starts and the old tile comes off the wall.
Subfloor rot from long-term moisture is one of the most common discoveries, and it affects both which flooring options are available and what the project ends up costing, since a compromised subfloor has to be addressed before any new floor goes down.
A 10% to 20% contingency is the right way to budget for an older home, and it is not padding or pessimism. It is the line item that exists because opening a decades-old wet wall is genuinely unpredictable, not because we expect the worst.
Why Bellevue Costs More Than the National Average
Three things explain most of the gap between a national bathroom cost figure and a Bellevue one.
Rates in the greater Seattle market run meaningfully above national benchmarks, driven by a tight trades market and sustained renovation demand across the region. That premium hits a full remodel with five trades far harder than a cosmetic refresh with one.
Also, permitted remodel work has to meet current code, which can pull in lighting, ventilation, and fixture requirements that a national cost calculator does not model at all. The state’s own cost-benefit analysis of recent code updates gives a sense of the direction, though the published figures are scoped to new construction rather than remodels. Treat it as a real cost driver without a clean published number attached to bathroom work specifically.
The Seattle-area premium over national averages is real, but we would rather understate it than hand you a multiplier to apply to your own project, because most of the specific percentages circulating online are contractor estimates rather than measured data. Treat the tier ranges at the top of this page as the Bellevue number, not a national figure adjusted upward.
Western Washington’s seismic requirements can also add cost to any project that touches wall or floor framing, which is more likely once plumbing moves than in a cosmetic refresh.
What You Get Back at Resale
According to the 2025 Cost vs Value Report, a national midrange bathroom remodel costs an average of $26,138 and adds about $20,915 in resale value, recouping roughly 80% of the investment. An upscale bathroom remodel costs an average of $81,612, adds around $34,000 in resale value, and recoups about 42%.
That pattern, where percentage return falls as scope and cost rise, mirrors what shows up in kitchen remodeling and most other major home projects. It is not a reason to avoid the bigger project. It is a reason to know which kind of decision you are making.
A midrange remodel functions more like a financial decision. A spa-level remodel is closer to a lifestyle decision that happens to add some value on top, and the custom-tier return is lower largely because highly personalized selections appeal to a narrower set of future buyers than a well-executed midrange bathroom does.
Ways to Control the Cost
- Keep the existing layout and plumbing locations. The single largest lever available, for all the reasons in the drain section above.
- Choose a stock or semi-custom vanity instead of fully custom. Most of the look for a meaningful fraction of the cost.
- Finalize tile and fixture selections before demolition starts. Change orders after work begins cost far more than the same decision made during planning.
- Plan around material lead times. Custom glass and special-order tile affect your schedule, and schedule slippage carries its own cost.
- Get three or more bids, and read the spread carefully. A wide range across quotes is normal in this market and usually reflects real differences in scope assumptions rather than someone padding a number. Before comparing them, verify each contractor is registered with Washington State Labor & Industries under RCW 18.27, which you can check by name or registration number through L&I’s contractor lookup. Any hesitation to show proof of registration or bonding is a warning sign worth acting on.
📋
Turn a Planning Range Into a Real Number
Every figure in this guide is a planning range. Seeing tile, vanity surfaces, and flooring under real lighting is what narrows it down to your bathroom. Compare materials at our Bellevue or Redmond showroom, open Saturdays.
Bring photos or rough measurements to either location, or take a look at some of our recent bathroom projects first if you are still gathering ideas. Either way, our bathroom remodeling team can walk you through what your specific project would actually cost.







